Our crew has more than 10 years of hands on floor coating experience in Amarillo and across the Texas Panhandle.
An Amarillo company with a cowboy owner, living and working in the same community as your floor.
Plain, upfront estimates with no surprise charges. We go over every cost with you before the work starts.
Diamond grinding, crack repair, and moisture tests come first, because prep is what makes a coating last.
Pro grade epoxy, polyaspartic, and polyurea picked for Panhandle sun, cold, and dust.
Garage floor coating turns a stained, dusty slab into a bright, sealed floor. We grind the concrete, fix the cracks, add color flakes, and finish with a tough top coat that shrugs off hot tires, salt, and oil.
Epoxy flooring bonds to prepared concrete and creates a smooth, easy to clean surface for kitchens, shops, and laundry rooms. We prep every slab with a diamond grinder, so the coating grips for years.
An epoxy garage floor handles hot tires, road salt, and shop spills. We build it with a strong primer, a thick color coat, and flakes that hide dust, so your garage cleans up with a mop.
Commercial epoxy flooring gives shops, offices, and restaurants a sealed surface that cleans fast and looks sharp. We work nights and weekends when we can, so your doors stay open.
A polyaspartic floor cures in hours and holds its color in strong sun. It is a great top coat over flakes, and a smart choice for garages with big windows and patios that face the sky.
Metallic epoxy flooring mixes pigments into clear epoxy and moves them by hand, so every floor is one of a kind. It looks like polished stone and cleans like glass.
Epoxy floor repair handles chips, cracks, peeling, and hot tire marks. We find the cause first, then grind, patch, and recoat, so the fix holds and the floor looks even.
Pool deck coatings add a lighter, textured surface that stays comfortable on bare feet. We seal the concrete with UV stable materials, so sun and chlorine do not wear it out.
Concrete floor coatings keep dust, oil, and water out of the slab. We match epoxy, polyaspartic, or polyurea to how you use the floor, so you get the right protection.
Polyurea floor coatings flex with the slab, cure quickly, and resist impact and abrasion. They are a smart choice for shops, ramps, loading areas, and tough garages.
Basement epoxy flooring seals dusty concrete and brightens a dark space. We test for moisture first, then coat with a system built for cool, below ground slabs.
Industrial epoxy flooring uses thick builds and hard top coats to survive forklifts, chemicals, and impacts. We plan work in zones, so production keeps moving.
Warehouse floor coatings cut dust, resist forklift wheels, and make big buildings brighter. We work around your shifts and shipments, one zone at a time.
Patio floor coatings add color and grip to plain slabs, and a UV stable top coat keeps them looking fresh. They are easy to sweep and easy to hose off.
Concrete floor resurfacing hides pits, stains, and old paint without tearing out the slab. We grind, repair, and apply a thin, strong layer, then finish it with color or a clear coat.
From a small repair to a full shop floor, one local epoxy contractor can plan, prep, coat, and finish your project. That means clear talk, fewer surprises, and floors that work together.
At Amarillo Epoxy, a local epoxy contractor, we bring 10 years of hands on experience to every floor. From garages and shops to showrooms and warehouses, we plan the job around your slab and finish it with care.

No two slabs are the same, so we check cracks, moisture, and old coatings before we pick a system. That plan shapes the prep, the primer, and the finish, which means a floor that bonds well and lasts.

Coating and Replacing With Skill:
We install, repair, and replace floor coatings for neighbors across Amarillo. Ten years of local work taught us how dry air, wind, dust, and sun treat a fresh coat, so we build for them from the first step.

A Simple, Careful Process:
First we grind and repair the slab. Next we prime and apply the color coat. Then we seal it with a tough top coat. Every step is planned, and every site is left clean.

A Floor for Every Space:
Small garage or big warehouse, home or business, this epoxy contractor has the tools and know how to do the job well. We keep prices clear and the schedule honest.

Our owner is a cowboy, so our epoxy contractor team treats every floor like it is our own. You get plain talk, a fair price, and a crew you can reach. Amarillo Epoxy is your local team for garage floors, shop floors, and commercial coatings.
Coated by people who live here, our floors are made for daily use, hot summers, and hard winters. As your Amarillo epoxy contractor, we aim for clean lines, tough surfaces, and floors that do not need constant repairs.
A commercial epoxy floor gives your shop, office, or restaurant a clean, strong surface. Our epoxy contractor crew grinds, repairs, and coats in zones, so your doors stay open and your floor stays smooth under daily traffic. It is a good fit for new builds and for replacement of tired old coatings.
Slabs can crack, and dust can ruin a bond. That is why we grind the surface, fix every crack, and test for moisture before we coat. The result is a floor that looks great now and keeps its shine for years.
Polyaspartic Floor Installation in Amarillo, Texas
Panhandle sun is strong, and plain epoxy can yellow in it. Our polyaspartic floors cure in hours, hold their color, and handle hot tires and cold snaps. As an epoxy contractor, we use them as top coats and as full systems, and we handle the work from the first grind to the final clean up.
Garage Floor Coating Installation in Amarillo, Texas
Need a garage floor that handles hot tires, salt, and oil? A properly installed coating is the answer. A good epoxy contractor grinds the slab, fills the cracks, adds color flakes, and seals the top so spills wipe up and the floor stays bright. It is the dependable upgrade for almost any garage.
Patio Floor Coatings in Amarillo, Texas
Your patio is where summer happens. Say goodbye to faded, stained concrete and welcome a colorful, grippy floor that resists sun and rain. It adds comfort, safety, and curb appeal, and a good epoxy contractor can finish it in a day or two.
Start with the basics. Look for a local company that answers the phone, gives written estimates, and shows photos of finished floors. Ask how they prepare the slab. The right answer is diamond grinding, not acid etching or a quick scrub. Ask what primer and top coat they use, and how thick the system will be. In Amarillo, dry air, wind, and big temperature swings change how coatings cure, so ask how they handle dust and slab temperature. Ask about moisture testing, since damp slabs can push a coating off. A good epoxy contractor will answer without hurrying you and will put the plan in writing. Be careful with a bid that is far lower than the rest, because skipped grinding is how most low bids save money. We welcome every one of these questions, and we share photos and references when you ask.
Most garage floor coatings in the Amarillo area cost about $5 to $10 per square foot. A typical two car garage of 400 to 600 square feet can run a few thousand dollars. The price depends on size, slab condition, the number of cracks, the type of system, and the finish. A basic flake system costs less than metallic or full quartz, and a polyaspartic top coat adds cost but lasts longer in sun. Heavy oil stains and old paint add prep time, and prep is where good work costs real money. Ask any epoxy contractor for a written estimate that lists grinding, crack repair, primer, base coat, flakes, top coat, and cleanup. We also tell you how long to keep cars off the new floor, usually one to three days for light vehicles. Our estimates are free, and we explain every line.
A quality system installed on a well prepared slab often lasts 10 to 20 years in a home garage, and 5 to 10 years in a busy shop. Peeling usually comes from one of three things: poor prep, moisture in the slab, or hot tires on a thin coating. We prevent them with deep diamond grinding, moisture testing, and a hard top coat made for tire heat. Cheap kits and quick jobs peel more often because they skip grinding. Strong sun can also yellow plain epoxy, so we use polyaspartic top coats where light hits the floor. Care matters too. Sweep grit, wipe spills, and use mats under rolling toolboxes. If a chip does appear, call us early, because small repairs are easy. An honest epoxy contractor will tell you how long a system should last and what could shorten it.
Both are good, and many floors use both. Epoxy is thick, strong, and good at filling small flaws. It costs less and bonds well to concrete, but it can yellow in strong sun and takes longer to cure. Polyaspartic cures in hours, holds its color in sunlight, and works in cold weather, but it costs more and sets so fast that it needs a skilled crew. A common plan is an epoxy base with flakes and a polyaspartic top coat, which gives you the strength of one and the sun resistance of the other. For a dark interior bay, plain epoxy with a clear coat can be plenty. For a sunny garage, patio, or shop with big doors, add polyaspartic. We explain the tradeoffs and let you decide.
We start by listening. You tell us what you want, what bothers you about the current floor, and when you hope to finish. Then we walk the space. We check the slab for cracks, stains, old coatings, and soft spots, we test moisture, and we measure the area. We ask about how you use the floor, since a hobby garage is different from a shop with forklifts. After the walk, we explain the plan in plain words, show color and flake samples, and write up an estimate that lists each step. You will not get a hard sell. If a repair is enough, we will say so. If replacement is better, we will explain why. A good epoxy contractor treats the first visit as a conversation, and so do we.
Spring and fall are our favorites. Temperatures are mild, and coatings cure at a steady pace. Epoxy likes a slab between about 50 and 90 degrees. Summer works too, but heat shortens the working time, so we mix small batches and start early in the morning. Winter works when we can warm the space, and fast curing polyaspartic helps in cold. Wind and dust are a bigger problem than weather some days, so we keep doors closed and wait for calm mornings when we can. Amarillo gets about 20 inches of rain a year, so moisture surprises are rare, but we still test every slab. A good epoxy contractor will tell you honestly when to wait. If your project is not urgent, we may suggest a calmer week. If it is, we will protect the job and get it done right.
Get in Touch with Amarillo Epoxy
Ready to upgrade your floor with a tough, clean coating?
As a locally owned epoxy contractor with 10 years in Amarillo, we bring care and skill to every project. Garages, shops, basements, patios, and replacements all get the same attention. Reach out today and see why neighbors across the Panhandle call us for clean, strong, and dependable floors.
Monday:
Tuesday:
Wednesday:
Thursday:
Friday:
Saturday:
Sunday:
5:00 AM – 10:00 PM
5:00 AM – 10:00 PM
5:00 AM – 10:00 PM
5:00 AM – 10:00 PM
5:00 AM – 10:00 PM
5:00 AM – 10:00 PM
5:00 AM – 10:00 PM